欧美在线小视频-欧美在线亚洲-欧美在线一二三-欧美在线一二三区-欧美在线一级精品

Geothermal heating is one of the commonly used heating measures in northern households, which is very helpful for winter. It can be configured not only in living rooms and bedrooms, but also in kitchens and bathrooms. But waterproof and moisture-proof measures should be taken, otherwise it will have a significant impact on the service life of geothermal energy. So how to lay the floor heating waterproof line?

1. Firstly, it is necessary to handle the floor heating laid on the ground, keep the ground clean, dry, and level, and then apply waterproof paint to prevent geothermal pipes from seeping into the downstairs. After the paint is dry, an insulation layer can be laid to prevent the waterproof film from generating odor when heated. Then lay geothermal pipes, lay a layer of composite film on the surface to isolate moisture, and finally lay the floor.
2. Precautions for floor heating construction.
① Pay attention to floor heating materials
Floor heating is a concealed project. Improper selection of underfloor heating materials, if there are quality issues or short service life, will affect the use and cause huge losses. Therefore, geothermal materials should be inspected before construction. The surface of high-quality floor heating pipes is smooth, without bumps, bubbles, or obvious color differences, and the hardness is moderate.
② Pay attention to on-site measurement
Before the construction of underfloor heating, it is necessary to find a professional installation company to analyze on-site measurements, as not every student's home or any functional area is suitable for installing underfloor heating. If installed in an inappropriate location, it is easy to encounter problems. Usually, a more reasonable design solution is needed.
③ Pay attention to the coil
Strict care must be taken during construction. The coil should pay attention to the distribution spacing, and the corners should not be bent to ensure the uniformity and stability of heat dissipation. During the construction process, the airtightness of the system should be checked at any time, and the water injection pressure test should not be ignored.